|
|
|
|
|
Product name : Vessel Control Cable with PVC Insulation and Sheath
|
| Details: |
It is used for the circuit insensitive to interference of AC rated voltage 250V or lower for ships, offshore platform and other building over water.
Executive standard: GB9332-88
Type, Description and Installation Requirements
Type |
Description
|
Installation requirements
|
|
CKVV/DA
|
Control cable with PVC insulation and sheath for ship
|
|
|
CKVV80/DA
|
Control cable with PVC insulation and sheath, bare copper wire braiding and armoring for ship
|
|
CKVV82/DA
|
Control cable with PVC insulation and sheath, copper wire braiding and armoring for ship
|
|
CKVV90/DA
|
Control cable with PVC insulation and inner sheath, bare steel wire braiding and armoring for ship
|
|
CKVV92/DA
|
Control cable with PVC insulation and inner sheath, PVC outer sheath, steel wire braiding and armoring for ship
|
|
CKJV/DA
|
Control cable with XLPE insulation and PVC sheath for ship
|
|
|
CKJV80/DA
|
Control cable with XLPE insulation and sheath, bare copper wire braiding and armoring for ship
|
|
CKJV82/DA
|
Control cable with XLPE insulation and PVC sheath, copper wire braiding and armoring for ship
|
|
CKJV90/DA
|
Control cable with XLPE insulation and PVC inner sheath, bare steel wire braiding and armoring ship.
|
|
CKJV92/DA
|
Control cable with XLPE insulation and PVC inner sheath, PVC outer sheath, steel wire braiding and armoring for ship
|
Technical Requirements:
- Cable should bear voltage test of AV 1500V or DC 3600V for 5min
- Vertical burning test performance for single piece shall meet the requirement of GB2951.19 standard
- Insulated resistance constant is no less than 36.7MΩ.km at 20℃ for CKV series cable and 3670 MΩ.km at 20℃ for CKJ series cable.
|
|
OVERHEAD LINE CONDUCTORS
